Quick Answer
Calculate Chemical Shell-and-Tube Heat Exchanger Log Mean Temperature Difference (LMTD)
Calculator
Need Equipment or a Supplier for This Project?
Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.
Find Engineering Solutions →Result Interpretation
Chemical Shell-and-Tube Heat Exchanger Log Mean Temperature Difference (LMTD) calculator computes Log mean temperature difference in K using the defined engineering formula and the input values provided. Log mean temperature difference is expressed in K. No universal acceptance threshold is defined by this calculator.
Worked Example
Verified calculation
Given:
- Temperature difference at one end (hot inlet - cold outlet or vice versa) = 80
- Temperature difference at the other end (hot outlet - cold inlet or vice versa) = 40
Expected Result:
- Log mean temperature difference = 57.707801635559
Engineering Interpretation:
Under the given input conditions, the calculated result is: Log mean temperature difference = 57.707801635559 K.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.
Formula / Method
log mean temperature difference = (hot inlet - cold outlet or vice versa - hot outlet - cold inlet or vice versa) / log(hot inlet - cold outlet or vice versa / hot outlet - cold inlet or vice versa)Formula family: formula_chemical_shell_and_tube_heat_exchanger_log_mean_temperature_difference_lmtd_calculator
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| delta_T1 | Temperature difference at one end (hot inlet - cold outlet or vice versa) | INPUT | Temperature difference at one end (hot inlet - cold outlet or vice versa) |
| delta_T2 | Temperature difference at the other end (hot outlet - cold inlet or vice versa) | INPUT | Temperature difference at the other end (hot outlet - cold inlet or vice versa) |
| result | Log mean temperature difference | OUTPUT | Log mean temperature difference |
Calculation Steps
- Enter the temperature difference at one end (hot inlet - cold outlet or vice versa) in K.
- Enter the temperature difference at the other end (hot outlet - cold inlet or vice versa) in K.
- Step 1: Compute log mean temperature difference.
- Read the log mean temperature difference (K) from the results.
Engineering Summary
Calculate Chemical Shell-and-Tube Heat Exchanger Log Mean Temperature Difference (LMTD)
Frequently Asked Questions
What does this calculator calculate?
The Chemical Shell-and-Tube Heat Exchanger Log Mean Temperature Difference (LMTD) calculator estimates Log mean temperature difference based on the input parameters you provide
Why is temperature difference at one end (hot inlet cold outlet or vice versa) important in this calculation?
temperature difference at one end (hot inlet cold outlet or vice versa) is used directly in the calculation of log mean temperature difference. Its effect on the result depends on the complete formula and the values of the other inputs.. When you enter temperature difference at one end (hot inlet cold outlet or vice versa) in K, the calculator uses it in the engineering formula to compute the output
How should I interpret the result log mean temperature difference?
The calculator outputs log mean temperature difference in K. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: Temperature difference at one end (hot inlet cold outlet or vice versa) (K), Temperature difference at the other end (hot outlet cold inlet or vice versa) (K). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
Chemical Process Shell-and-Tube Heat Exchanger Pressure Drop Calculator
Chemical Evaporator Overall Heat Transfer Coefficient Estimator Calculator
Fenske Equation for Minimum Theoretical Stages at Total Reflux calculator
Chemical Absorption Tower Minimum Solvent Flow Rate Calculator
Chemical Distillation Total Condenser Duty (Phase-Change Energy Balance) calculator
Chemical Molar Concentration from Mass, Molar Mass, and Volume calculator
Browse More Tools
Explore the full index of engineering calculators on this vertical site.